getting close to finishing my 360 and im looking for wheel cylinders or wheel cylinder kit for both front and rear brakes. also looking for both rear axle inner cv boots or axles.
looking for front stabilizer bushing that fits at the front in the center of the suspension. all help will be appreciated.
thanks
david
*** As part of the forum post crash revival, The phpBB software has also been upgraded from 3.2.1 to 3.2.7 ***
Please report any issues that you may experience and thanks again for your patience and understanding during the outage.
(You may clear this alert message by clicking the X in the top right corner of this box)
-Sigmaz (jon)
Please report any issues that you may experience and thanks again for your patience and understanding during the outage.
(You may clear this alert message by clicking the X in the top right corner of this box)
-Sigmaz (jon)
parts for 360 sedan
Moderators: 2stroketurbo, Subie Gal
-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3833
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
Re: parts for 360 sedan
David - if you don't have the BOOK OF REPRINTS you can download it free,
see PUBLICATIONS topic on this message board. There are sources for
the axle boots and tips on installing them.
Also LOTS on brake cyl repair and replacement.
Ed
see PUBLICATIONS topic on this message board. There are sources for
the axle boots and tips on installing them.
Also LOTS on brake cyl repair and replacement.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
Re: parts for 360 sedan
I have the new wheel cylinder cups. $30.00 shipped to you. Sedan or T/V sets Also they are on ebay.
Who is online
Users browsing this forum: No registered users and 3 guests