NEW HERE, 360 SAMBAR RESTORATION PROJECT
Moderators: Subie Gal, 2stroketurbo
NEW HERE, 360 SAMBAR RESTORATION PROJECT
Hello,
I am from Wisconsin as well and I will be restoring a 69 360 Van. I work for Subaru City in Milwaukee,WI and we bought
a very nice Sambar Van from a ramdom customer. He was the second owner and has owned it since 1973. I will post pictures
later in this post.
The van had a 70's "custom" paint job and custom interior which included shag carpet and a bubble moon roof. I'm sorry to
say, it wasn't cool then and isn't cool now.
The van will be restored by My team a guys at the Collision Center Here at the dealership. It needs very little at this point
as it was a very well preserved piece to start with. I will be needing many small items thru this restoration project. So
I will be posting often. This vehicle will be all original when done and will be on the showroom floor here at the Subaru
Dealership. I'm not promising it to be a 900 + point car, but it will be done at the best quality possible.
I will list some items in the want ads that I am needing help finding. I will post a few pictures of the original and the progress
with the body.
I'm excited to meet some loyal 360 owners and here their stories about their car/truck/van. Any help would be appreciated!
I will try and figure out how to post pictures now.
Thanks!
Scott Wilson
EXCITED Subaru 360 Project manager
I am from Wisconsin as well and I will be restoring a 69 360 Van. I work for Subaru City in Milwaukee,WI and we bought
a very nice Sambar Van from a ramdom customer. He was the second owner and has owned it since 1973. I will post pictures
later in this post.
The van had a 70's "custom" paint job and custom interior which included shag carpet and a bubble moon roof. I'm sorry to
say, it wasn't cool then and isn't cool now.
The van will be restored by My team a guys at the Collision Center Here at the dealership. It needs very little at this point
as it was a very well preserved piece to start with. I will be needing many small items thru this restoration project. So
I will be posting often. This vehicle will be all original when done and will be on the showroom floor here at the Subaru
Dealership. I'm not promising it to be a 900 + point car, but it will be done at the best quality possible.
I will list some items in the want ads that I am needing help finding. I will post a few pictures of the original and the progress
with the body.
I'm excited to meet some loyal 360 owners and here their stories about their car/truck/van. Any help would be appreciated!
I will try and figure out how to post pictures now.
Thanks!
Scott Wilson
EXCITED Subaru 360 Project manager
- kjrcace360fan
- 360 Master
- Posts: 3116
- Joined: 14 years ago
- Location: Charleston, West Virginia
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
You came to the right place. This is the Only place you need to go for knowledge and help. Can't wait to see some pics. I post mine on flickr.com then copy the bbcode what ever that is directly into the post. I think that's what I do. but it works. sometimes.
Spud the Orange Young, Hippie (Sold), DB1 Yatch car, DB2 Cheesburger dune buggy
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
https://imgur.com/JUjgCh2
https://imgur.com/kLiMnMe
https://imgur.com/KxLWatQ
https://imgur.com/dA7d1kI
https://imgur.com/q3Tnps5
https://imgur.com/E4g4QjU
https://imgur.com/uD46ehT
https://imgur.com/ZtVO9B3
https://imgur.com/EMg623E
https://imgur.com/dLMQ0x8
https://imgur.com/OaYcXEG
https://imgur.com/2bkmI7M
https://imgur.com/t69KmHw
https://imgur.com/N6H7DVc
https://imgur.com/7CfJnoh
https://imgur.com/HkQ8Nwg
Hope this link works ? Thanks again!
https://imgur.com/kLiMnMe
https://imgur.com/KxLWatQ
https://imgur.com/dA7d1kI
https://imgur.com/q3Tnps5
https://imgur.com/E4g4QjU
https://imgur.com/uD46ehT
https://imgur.com/ZtVO9B3
https://imgur.com/EMg623E
https://imgur.com/dLMQ0x8
https://imgur.com/OaYcXEG
https://imgur.com/2bkmI7M
https://imgur.com/t69KmHw
https://imgur.com/N6H7DVc
https://imgur.com/7CfJnoh
https://imgur.com/HkQ8Nwg
Hope this link works ? Thanks again!
-
- 360 Master
- Posts: 5177
- Joined: 18 years ago
- Location: Portland Or. Where we avg 77 days of sunshine per year. Whoopee!
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
excellent!
-
- 360 Master
- Posts: 5177
- Joined: 18 years ago
- Location: Portland Or. Where we avg 77 days of sunshine per year. Whoopee!
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
ohhhh myyyyyy. That is the shaggiest shag wagon I ever NEED to see. GOOD LUCK!
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Nice work, you need Jeremy's free van body for a new roof.
- jeremyrschroeder
- 360 Master
- Posts: 411
- Joined: 12 years ago
- Location: Kansas City
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Wow - was that hole from a gun turret or dome sky light? Hope you got a picture of that either way! Yes I can cut out a section of roof for you if you need - you just have to let me know fast as I just stripped/cut everything off it so I am putting her down on Tuesday. PM if interested.
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
WE are attempting to fit a piece in that hole on Monday. A whole roof would be nice, I'm jus afraid to drill it off at the welds. The whole
thing would have to be braced. Im sure shipping would damage the roof you have? We thought we would try making a piece and if that
didn't work we would look for a parts car?
If we had your van body, we would remove the roof on your van first to see how it was assembled. We like to drill the spot welds out instead of cutting.
why is your van leaving for scrap?
I need a headliner back section
steering wheel
spare tire hold down
rear seat (unicorn/needle in a haystack)
wiper arms
I will post a larger list in the want ads
Thanks for looking at the post
Scott
thing would have to be braced. Im sure shipping would damage the roof you have? We thought we would try making a piece and if that
didn't work we would look for a parts car?
If we had your van body, we would remove the roof on your van first to see how it was assembled. We like to drill the spot welds out instead of cutting.
why is your van leaving for scrap?
I need a headliner back section
steering wheel
spare tire hold down
rear seat (unicorn/needle in a haystack)
wiper arms
I will post a larger list in the want ads
Thanks for looking at the post
Scott
- jeremyrschroeder
- 360 Master
- Posts: 411
- Joined: 12 years ago
- Location: Kansas City
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
The van is getting scrapped because it is just too far gone and I have a super solid rust free body and chasis already but didn't have every little small part that one would need to restore and there is alot of them. The roof I have is pretty good - alot of surface rust but pretty decent, but bad at both ends.
I maybe be able to help you with the spare tire holder if you are talking about the one that is attached to the the body.
I maybe be able to help you with the spare tire holder if you are talking about the one that is attached to the the body.
- Preciador6
- 360 Master
- Posts: 834
- Joined: 9 years ago
- Location: Pomona California
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Jeremy do you have the brake clutch metal cover for a van? also need the rear breather on back driver side and the ash trayjeremyrschroeder wrote: ↑6 years ago The van is getting scrapped because it is just too far gone and I have a super solid rust free body and chasis already but didn't have every little small part that one would need to restore and there is alot of them. The roof I have is pretty good - alot of surface rust but pretty decent, but bad at both ends.
I maybe be able to help you with the spare tire holder if you are talking about the one that is attached to the the body.
- jeremyrschroeder
- 360 Master
- Posts: 411
- Joined: 12 years ago
- Location: Kansas City
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
No I don't got that access panel or the ash tray. There was a time where I could of got you that breather but that van has been completely stripped cut apart and taken to salvage now it is long gone
-
- Club Founder - 360 Guru
- Posts: 4000
- Joined: 18 years ago
- Location: Tucson AZ (I'm Ed Parsil)
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Welcome to The Club! I had a '70 van for 40 years +
Drove it every day, loved it!
At 81 I could still get out and get under -
just couldn't get up again.
So it is thriving with its new owner
who is much more agile than I am.
Ed
Drove it every day, loved it!
At 81 I could still get out and get under -
just couldn't get up again.
So it is thriving with its new owner
who is much more agile than I am.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
- Preciador6
- 360 Master
- Posts: 834
- Joined: 9 years ago
- Location: Pomona California
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Thanks its sold nowjeremyrschroeder wrote: ↑6 years ago No I don't got that access panel or the ash tray. There was a time where I could of got you that breather but that van has been completely stripped cut apart and taken to salvage now it is long gone
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
I always wondered what happened to Scooby Doo's Mystery Machine. Looks like you're on the right track...good luck and welcome to the club.
Jim Cimino
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
UPDATE
Here is the van as of today. Making good progress but still have much to do!
No more 80"s, Disco, Mystry Machine, BUBBLE TOP, Shaggin Wagin! Or whatever crazy name
it had?
Here is the van as of today. Making good progress but still have much to do!
No more 80"s, Disco, Mystry Machine, BUBBLE TOP, Shaggin Wagin! Or whatever crazy name
it had?
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Where can i get the heater/valve or whatever its called?
I am looking for the air filter housing and the Top engine cover.
Thanks !
I am looking for the air filter housing and the Top engine cover.
Thanks !
- jeremyrschroeder
- 360 Master
- Posts: 411
- Joined: 12 years ago
- Location: Kansas City
- Contact:
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
I may have an extra top engine cover
- books1
- 360 Master
- Posts: 5567
- Joined: 13 years ago
- Location: Perth, Western Australia ..... Young SS downunder
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
That bodywork is great - it's a different van!
- books1
- 360 Master
- Posts: 5567
- Joined: 13 years ago
- Location: Perth, Western Australia ..... Young SS downunder
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Scott, as you are a Subaru dealer, are there any 360 parts that still remain active (that you have managed to ascertain so far)
As a regular shopper on Yahoo Japan auctions - I sorta suspect that things like wheel bolt sets, new distributors and even fuel tanks might possibly still be available, judging by the regularity by which they keep appearing...
Cheers,
Ian
As a regular shopper on Yahoo Japan auctions - I sorta suspect that things like wheel bolt sets, new distributors and even fuel tanks might possibly still be available, judging by the regularity by which they keep appearing...
Cheers,
Ian
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Please let me know if you have the cover . I will gladly buy it from you.
This site is so helpful! I can't thank everyone enough for the information that everyone has contributed to the site!
THANKS EVERYONE!!
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
I have my parts manager working on this. He is looking for any and all suspension and brake parts. He is also searching for engine stuff. We haven't been successfulbooks1 wrote: ↑6 years ago Scott, as you are a Subaru dealer, are there any 360 parts that still remain active (that you have managed to ascertain so far)
As a regular shopper on Yahoo Japan auctions - I sorta suspect that things like wheel bolt sets, new distributors and even fuel tanks might possibly still be available, judging by the regularity by which they keep appearing...
Cheers,
Ian
at locating anything much. If i get a minute i will sit down with him and we will go thru the 360 manual and see what we can find. I can tell you that most of the
stuff today is based off vin # and if you don't have a 17 digit vin # ,it makes it very difficult to search.
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Are you going to paint the frame?
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
Yes, we will be removing everything and doing the frame next. We will be trying to make this van as
close to new as possible.?
close to new as possible.?
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
All you need to do is call into you some regional warehouse and tell them what you are looking for and give them numbersSCOTTW wrote: ↑6 years agoI have my parts manager working on this. He is looking for any and all suspension and brake parts. He is also searching for engine stuff. We haven't been successfulbooks1 wrote: ↑6 years ago Scott, as you are a Subaru dealer, are there any 360 parts that still remain active (that you have managed to ascertain so far)
As a regular shopper on Yahoo Japan auctions - I sorta suspect that things like wheel bolt sets, new distributors and even fuel tanks might possibly still be available, judging by the regularity by which they keep appearing...
Cheers,
Ian
at locating anything much. If i get a minute i will sit down with him and we will go thru the 360 manual and see what we can find. I can tell you that most of the
stuff today is based off vin # and if you don't have a 17 digit vin # ,it makes it very difficult to search.
If they are so inclined they can also check Japan for you as well
I did this all the time as a Fixed Operations Director for Subaru
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
The parts Manager has found some items, he will be e-mailing me by the end of the day. I requested everything Brake related and
everything suspension related. I asked about rear view mirrors,the top engine cover,air filter housing,steering wheel, carpet,back bench
seat. Things I knew i needed. We looked them up while i was there. No luck on those items.
It looks like most of the parts are in one warehouse. I know for sure there are 20 brake hoses in stock. I know for sure!
I'm not sure how big the parts list will be? but if we can get them, I will post the information.
everything suspension related. I asked about rear view mirrors,the top engine cover,air filter housing,steering wheel, carpet,back bench
seat. Things I knew i needed. We looked them up while i was there. No luck on those items.
It looks like most of the parts are in one warehouse. I know for sure there are 20 brake hoses in stock. I know for sure!
I'm not sure how big the parts list will be? but if we can get them, I will post the information.
- books1
- 360 Master
- Posts: 5567
- Joined: 13 years ago
- Location: Perth, Western Australia ..... Young SS downunder
Re: NEW HERE, 360 SAMBAR RESTORATION PROJECT
That's great Scott!
Downunder, when I've gone into a Subaru dealership and asked if any parts exist, I just get either laughed at , or there's just no reaction, with an open-mouthed gormless glazed-eye expression.... - so I eventually gave up.
Downunder, when I've gone into a Subaru dealership and asked if any parts exist, I just get either laughed at , or there's just no reaction, with an open-mouthed gormless glazed-eye expression.... - so I eventually gave up.