*** As part of the forum post crash revival, The phpBB software has also been upgraded from 3.2.1 to 3.2.7 ***
Please report any issues that you may experience and thanks again for your patience and understanding during the outage.
(You may clear this alert message by clicking the X in the top right corner of this box)
-Sigmaz (jon)
Place to come in and say HI to the club after you have registered
Moderators: 2stroketurbo, Subie Gal
-
robrizzo
- Posts: 23
- Joined: 2 years ago
- Location: West Island Fairhaven MA
#1
Post
by robrizzo » 2 years ago
I have been a car enthusiast my whole life. from Muscle cars to Porsches to VW bus's and now Micro cars.
I have a 1969 Sambar 360 van.
Looking for a air cleaner and H code key and I am sure more soon to come. reach out say hello and hope I can assist anyone anytime I can if you need a helping hand

-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3849
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#2
Post
by subaru360nut » 2 years ago
Rob - Welcome to The Club! I had a van for more than 40 years,
drove it every day and it never let me down! When you drive
360s every day they don't have time to sit and pout.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
books1
- 360 Master
- Posts: 5005
- Joined: 10 years ago
- Location: Perth, Western Australia ..... Young SS downunder
#3
Post
by books1 » 2 years ago
Welcome to the Club from downunder, Rob. This club covers all corners of the Globe
(who coined that phrase anyhow? - doesn't make sense!) 
-
jcimino
- 360 Master
- Posts: 379
- Joined: 4 years ago
- Location: Dushore, PA
#4
Post
by jcimino » 2 years ago
Welcome to the club. Do you have the code for the key you are looking for? When I purchased my 360 the key was missing and one of the guys in the club sent me his to have a copy made.
Jim Cimino
-
robrizzo
- Posts: 23
- Joined: 2 years ago
- Location: West Island Fairhaven MA
#5
Post
by robrizzo » 2 years ago
jcimino wrote: ↑2 years ago
Welcome to the club. Do you have the code for the key you are looking for? When I purchased my 360 the key was missing and one of the guys in the club sent me his to have a copy made.
H code. I actually found some. I have a guy that lives one town away from my office that will help and make the key. Code is H631 SJ$ is the blank I purchased. everyone on here is great. I have been on Porsche and vw Forums. MANY HATERS and KNOW IT ALLS
not here
Thank You to you all
-
robrizzo
- Posts: 23
- Joined: 2 years ago
- Location: West Island Fairhaven MA
#7
Post
by robrizzo » 2 years ago
subaru360nut wrote: ↑2 years ago
Rob - Welcome to The Club! I had a van for more than 40 years,
drove it every day and it never let me down! When you drive
360s every day they don't have time to sit and pout.
Ed
I am looking forward to getting the engine running. I need a air filter tin box for it

-
jcimino
- 360 Master
- Posts: 379
- Joined: 4 years ago
- Location: Dushore, PA
#8
Post
by jcimino » 2 years ago
Chris White had a good selection of key blanks.
Jim Cimino
-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3849
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#9
Post
by subaru360nut » 2 years ago
robrizzo wrote: ↑2 years ago
subaru360nut wrote: ↑2 years ago
Rob - Welcome to The Club! I had a van for more than 40 years,
drove it every day and it never let me down! When you drive
360s every day they don't have time to sit and pout.
Ed
I am looking forward to getting the engine running. I need a air filter tin box for it
It's not good to run the engine without an air filter BUT until you find the original you
can go to a motorcycle dealer and get a clamp-filter unit with 1 7/8: ID and it will keep
the crud out of the engine.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
robrizzo
- Posts: 23
- Joined: 2 years ago
- Location: West Island Fairhaven MA
#10
Post
by robrizzo » 2 years ago
subaru360nut wrote: ↑2 years ago
robrizzo wrote: ↑2 years ago
subaru360nut wrote: ↑2 years ago
Rob - Welcome to The Club! I had a van for more than 40 years,
drove it every day and it never let me down! When you drive
360s every day they don't have time to sit and pout.
Ed
I am looking forward to getting the engine running. I need a air filter tin box for it
It's not good to run the engine without an air filter BUT until you find the original you
can go to a motorcycle dealer and get a clamp-filter unit with 1 7/8: ID and it will keep
the crud out of the engine.
Ed
thanks but I dont even have it running yet. LOL.
how can i put the word out I need one? what should it cost me? maybe Ill have to fab one?
-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3849
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#11
Post
by subaru360nut » 2 years ago
You can run a free ad in the Newsletter, which goes to all members.
Also post a PARTS WANTED ad on this website, lower section of the main page this is on.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
oldone
- 360 Master
- Posts: 4375
- Joined: 9 years ago
- Location: Norman Okla / OU SOONERS Thunder
#12
Post
by oldone » 2 years ago
Welcome to the club....... Maybe some one will have a air cleaner can , it takes time to find the hard to get parts.
-
rogerbhp
- 360 Master
- Posts: 1765
- Joined: 15 years ago
- Location: LA, California
#13
Post
by rogerbhp » 2 years ago
Try calling Greg at (646) 334-5998. I think he's in NY. He's selling some truck parts.
-
kjrcace360fan
- 360 Master
- Posts: 2898
- Joined: 10 years ago
- Location: Charleston, West Virginia
#14
Post
by kjrcace360fan » 2 years ago
Welcome to the club, Not much help with truck parts
Spud the Orange Young, Hippie, DB1 Yatch car, DB2 Cheesburger dune buggy
Who is online
Users browsing this forum: No registered users and 2 guests