New member
Moderators: Subie Gal, 2stroketurbo
New member
Hi, all. New to the board, new to 360's. Been looking for a microcar for a while now and decided one of these would get and hold my interest, plus it was for sale reasonably close to me and the price was, well, ok. It's all there (except for some brake parts) and works, but as with all old cars, suffers from neglect. The body is bettrer-than-fair w/a bit of previous rust repair (well-executed) and an old faded re-paint. Interior was nice w/door panels needing some attention. Runs ok, with everything needing some attention, but everything is minor repairs, nothing major so far. Plan eventually to turn it into a convertible. Looking for the expertise and guidance from the members of the board.
- carlofsumner
- 360 Master
- Posts: 710
- Joined: 12 years ago
- Location: Tacoma, WA USA
- Contact:
Re: New member
Welcome to the club and the forum. You will either find the part you want or help in finding our manufacturing it here. This is the best group of gals and guys you could want to be a part of. Look forward to seeing you car and reading about it's refurbishing.
Carl D
1968 Ultra Van 400 - referred to as a whale and named The Righteous Coach
1970 Subaru sedan- referred to as an Orca chaser
1968 Ultra Van 400 - referred to as a whale and named The Righteous Coach
1970 Subaru sedan- referred to as an Orca chaser
Re: New member
Welcome We like pics Whats your location? There is always help here, from the crew.
-
- Club Founder - 360 Guru
- Posts: 4000
- Joined: 18 years ago
- Location: Tucson AZ (I'm Ed Parsil)
Re: New member
Welcome to The Club!
If you need seals for the wheel cyls I still
have all sizes, e-mail me if you need any.
$2. each + postage, special buy from
Raybestos.
Ed Parsil in Tucson AZ
If you need seals for the wheel cyls I still
have all sizes, e-mail me if you need any.
$2. each + postage, special buy from
Raybestos.
Ed Parsil in Tucson AZ
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
- 360 Master
- Posts: 5177
- Joined: 18 years ago
- Location: Portland Or. Where we avg 77 days of sunshine per year. Whoopee!
- Contact:
Re: New member
Welcome to the club, you will find much needed support here !
- kjrcace360fan
- 360 Master
- Posts: 3115
- Joined: 14 years ago
- Location: Charleston, West Virginia
Re: New member
Welcome to the club! Great to have you. Can we see some pics?
Spud the Orange Young, Hippie (Sold), DB1 Yatch car, DB2 Cheesburger dune buggy
Re: New member
Thanx to all for the responses. I am in the Fort Lauderdale area. I have a few pix but can't upload them as of yet cuz they are too large in my computer and I don't have access to any on-line pix-posting.
Thanx, Ed for the offer for wheel cylinder cups. I bought replacements as described in the BOR and they have worked well. Just now need to try to come up w/e-brake parts inside the drum.
Thanx, Ed for the offer for wheel cylinder cups. I bought replacements as described in the BOR and they have worked well. Just now need to try to come up w/e-brake parts inside the drum.
- books1
- 360 Master
- Posts: 5561
- Joined: 13 years ago
- Location: Perth, Western Australia ..... Young SS downunder
Re: New member
Welcome to the Club from downunder, whatsisname!
Re: New member
Welcome. These guys are the best.And if you feel like your giving up just come on here , they will get you back on track. I sure could have not gottin mine to this point without These guys. Good luck
68 sedan