*** As part of the forum post crash revival, The phpBB software has also been upgraded from 3.2.1 to 3.2.7 ***
Please report any issues that you may experience and thanks again for your patience and understanding during the outage.
(You may clear this alert message by clicking the X in the top right corner of this box)
-Sigmaz (jon)
Place to come in and say HI to the club after you have registered
Moderators: 2stroketurbo, Subie Gal
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#1
Post
by patrick106902 » 8 years ago
Hello All,
I was lucky enough to find a refurbished 1969 Subaru 360 Young S. I also wanted to say hello to everyone, and I look forward to working with all of you!

Last edited by
patrick106902 on Fri Apr 06, 2012 10:04 am, edited 1 time in total.
-
oldone
- 360 Master
- Posts: 4364
- Joined: 9 years ago
- Location: Norman Okla / OU SOONERS Thunder
#2
Post
by oldone » 8 years ago
Welcome to the club Patrick. You got around the fist guestion for newbies, pic pics please! Nice find I might say. whats your location? wayne
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#3
Post
by patrick106902 » 8 years ago
I am in the Allentown/LV area. I am a big one for pixs as well...The car seems to be in great shape... I went all the way to arizona for it

It runs great, all i need to do is bleed the brake lines, the brake pedal goes to the floor. Within the last 400 miles the brakes were revamped and master cylander rebuilt, so I am goign to bleed before I do anythign else... start small

-
StevenM
- 360 Master
- Posts: 1307
- Joined: 14 years ago
- Location: Succasunna, NJ
-
Contact:
#4
Post
by StevenM » 8 years ago
Welcome to the club - what a great example you've got there! FYI you've got at least 4 club members within an hour or two from you, two in PA and two in NJ - myself included.
If you need any manuals
see this page from my website. If you need the BOR, PM me for the link.
Best of luck (you seem to already have it!),
Steve
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#5
Post
by patrick106902 » 8 years ago
StevenM wrote:Welcome to the club - what a great example you've got there! FYI you've got at least 4 club members within an hour or two from you, two in PA and two in NJ - myself included.
If you need any manuals
see this page from my website. If you need the BOR, PM me for the link.
Best of luck (you seem to already have it!),
Steve
Thanks Steve,
I am very excited to be apart of this club and Subaru, I have been a long time Subaru owner, so this just tops the list

I did get the 2011 BOR which has already been helpful. Thanks again!
-
books1
- 360 Master
- Posts: 4980
- Joined: 10 years ago
- Location: Perth, Western Australia ..... Young SS downunder
#6
Post
by books1 » 8 years ago
Welcome to the Club from downunder, Patrick!
Nice vehicle - I saw a front bumper on Yahoo Japan auctions recently, might still be there (if you don't have one tucked away somewhere)
Cheers,
Ian
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#7
Post
by patrick106902 » 8 years ago
books1 wrote:Welcome to the Club from downunder, Patrick!
Nice vehicle - I saw a front bumper on Yahoo Japan auctions recently, might still be there (if you don't have one tucked away somewhere)
Cheers,
Ian
If you could point me to the right direction, that would be GREAT, i do have a normal 360 bumper I will soon post for sale, but still need the young for my car.
Thanks A LOT!
-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3833
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#8
Post
by subaru360nut » 8 years ago
Patrick - welcome to The Club! It is not often I see a Young with the correct wheel covers, but your has them. If you want the hood ornament contact Burt Richmond in IL, he got some remade.
I used to have a lot of Young bumper ends, last one left about 10 years ago. Last new Young bumpers went to a member in OK about 20 years ago. But there are bound to be some around.
I went to see a member in Wynne AR back in 1981, George Benefield who was the first one in the Club with parts books. He has since passed away, but he had about a dozen 360s, all body styles, that he had restored. The Young bumper ends did not look like rubber, so I asked George about them and found he had hand-whittled them from wood and painted them black.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
2stroketurbo
- 360 Master
- Posts: 5175
- Joined: 15 years ago
- Location: Portland Or. Where we avg 77 days of sunshine per year. Whoopee!
-
Contact:
#9
Post
by 2stroketurbo » 8 years ago
Awesome ! Welcome to the club. Nice looking Young you have there. Did you go yourself to bring it back to PA?
-
drrishi1
- 360 Fanatic
- Posts: 292
- Joined: 9 years ago
- Location: Norfolk, VA
-
Contact:
#10
Post
by drrishi1 » 8 years ago
nice car, welcome aboard
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#11
Post
by patrick106902 » 8 years ago
subaru360nut wrote:Patrick - welcome to The Club! It is not often I see a Young with the correct wheel covers, but your has them. If you want the hood ornament contact Burt Richmond in IL, he got some remade.
I used to have a lot of Young bumper ends, last one left about 10 years ago. Last new Young bumpers went to a member in OK about 20 years ago. But there are bound to be some around.
I went to see a member in Wynne AR back in 1981, George Benefield who was the first one in the Club with parts books. He has since passed away, but he had about a dozen 360s, all body styles, that he had restored. The Young bumper ends did not look like rubber, so I asked George about them and found he had hand-whittled them from wood and painted them black.
Ed
Thanks for the info, the car is 99% complete besides a few cosmetic parts. I will have to look this person up. I am new to this (obviously) So it will take me a few times around the block to learn about this forum. And to hand make bumper ends out of wood, thats a craft!
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#12
Post
by patrick106902 » 8 years ago
2stroketurbo wrote:Awesome ! Welcome to the club. Nice looking Young you have there. Did you go yourself to bring it back to PA?
Thanks, glad to be here

My partner and I went out and picked it up, out and back, 5,000 miles and 6 days!
-
Sigmaz
- Site Admin
- Posts: 2795
- Joined: 15 years ago
- Location: Hamilton Square, PA
-
Contact:
#13
Post
by Sigmaz » 8 years ago
Hey Nice find! I remember reading about the previous owner putting that top together.. Nice to see it made it to a good home.
I'm just up Rt.33 from you and I drive my sedan all the time, it would be great to have another local to run with!
Hit me up if you need anything or any help getting those brakes stopping. and ofcourse you're going to have to bring it to the west end car show and line up..
I'm trying to get another owner in Windgap to finish his up by then too.
How wonderful!
-Jon


'The little su-BAR-u... Wow.'
-
Smithrob1
- 360 Fanatic
- Posts: 160
- Joined: 9 years ago
- Location: Gorgeous Reno, NV
-
Contact:
#14
Post
by Smithrob1 » 8 years ago
Welcome aboard Patrick!! Looking @ the front of your 360....I'd say instead of putting a front bumper on, just paint the lips! Looks like one of those Chevron cars!! Lots of personality and a lucky find!!
You are in good hands here...we have Obi Won Kenobi (Ed) and a whole group of true-to-life 360 experts in this club (I'm certainly not one of those yet, but VERY VERY glad I know where to find them!!)
ENJOY!!!
-
drrishi1
- 360 Fanatic
- Posts: 292
- Joined: 9 years ago
- Location: Norfolk, VA
-
Contact:
#15
Post
by drrishi1 » 8 years ago
I thougth Mark was Obi and Ed was Yoda

-
Subie Gal
- Site Admin
- Posts: 1030
- Joined: 15 years ago
- Location: WA
-
Contact:
#16
Post
by Subie Gal » 8 years ago
Yay! Welcome to the 360 family
Pretty car, love it!!
Jamie
1970 360 Sambar Van aka Stanley
1970 360 Sambar Truck aka Dirty
1970 360 Sedan - yet to be named.
1970 Subaru FF-1
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#17
Post
by patrick106902 » 8 years ago
Hey everyone, thanks for the welcome greetings. I have always been a subaru person, I currently am on my 5th daily driver subaru. This is my first 360, so I was luck enough to find one that needs minimal work. I am not very mechanical, I know what certain things are, I can change oil in a car and the wiper blades (LOL). But I would like to learn as I go along, and I am glad to hear you are all so helpful!
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#18
Post
by patrick106902 » 8 years ago
Sigmaz wrote:Hey Nice find! I remember reading about the previous owner putting that top together.. Nice to see it made it to a good home.
I'm just up Rt.33 from you and I drive my sedan all the time, it would be great to have another local to run with!
Hit me up if you need anything or any help getting those brakes stopping. and ofcourse you're going to have to bring it to the west end car show and line up..
I'm trying to get another owner in Windgap to finish his up by then too.
How wonderful!
Hey Jon, Thats great!
I stopped in and spoke to the gentleman in windgap before I had purchased this one. WHen is the West end car show?And I have to ask, do you drive yours on 33 at all?!?!?!
-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3833
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#19
Post
by subaru360nut » 8 years ago
Patrick - your expertise at changing oil will go to waste, since this procedure is never needed on your 360. All you do is ADD a quart of good 2-stroke oil to the oil tank whenever the light on the dash starts blinking (about every 300 miles on average) and the engine recycles it to lubricate itself and kill the mosquitoes in your area. If it's not smokin', it's broken
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
patrick106902
- 360 Newbie
- Posts: 59
- Joined: 8 years ago
#20
Post
by patrick106902 » 8 years ago
subaru360nut wrote:Patrick - your expertise at changing oil will go to waste, since this procedure is never needed on your 360. All you do is ADD a quart of good 2-stroke oil to the oil tank whenever the light on the dash starts blinking (about every 300 miles on average) and the engine recycles it to lubricate itself and kill the mosquitoes in your area. If it's not smokin', it's broken
Ed
LOL, I love that saying, I have seen it a few times already

I am eager to learn about this car, I even just got my hands on the Chilton Manual for the Jap Cars from 1972

-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3833
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#21
Post
by subaru360nut » 8 years ago
I've had one of those orange Chiltons since I first got my van 37 years ago. Then I gradually acquired all the Subaru manuals and in 1981 got permission from SOA to reprint them, at cost, for Club members only. I still have some reprints left, they are also available online (free) and on CD (at cost).
ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
Sigmaz
- Site Admin
- Posts: 2795
- Joined: 15 years ago
- Location: Hamilton Square, PA
-
Contact:
#22
Post
by Sigmaz » 8 years ago
patrickturner wrote:Sigmaz wrote:Hey Nice find! I remember reading about the previous owner putting that top together.. Nice to see it made it to a good home.
I'm just up Rt.33 from you and I drive my sedan all the time, it would be great to have another local to run with!
Hit me up if you need anything or any help getting those brakes stopping. and ofcourse you're going to have to bring it to the west end car show and line up..
I'm trying to get another owner in Windgap to finish his up by then too.
How wonderful!
Hey Jon, Thats great!
I stopped in and spoke to the gentleman in windgap before I had purchased this one. WHen is the West end car show?And I have to ask, do you drive yours on 33 at all?!?!?!
I'll have to check the calendar I think its before the fair... maybe June...nt sure right now.
I have no problem with running on 33. Or 80 east into nj .for short runs... but I'm not at all that bright....
-Jon


'The little su-BAR-u... Wow.'
-
2stroketurbo
- 360 Master
- Posts: 5175
- Joined: 15 years ago
- Location: Portland Or. Where we avg 77 days of sunshine per year. Whoopee!
-
Contact:
#23
Post
by 2stroketurbo » 8 years ago
I want to see drag race footage.....

-
Sigmaz
- Site Admin
- Posts: 2795
- Joined: 15 years ago
- Location: Hamilton Square, PA
-
Contact:
#24
Post
by Sigmaz » 8 years ago
2stroketurbo wrote:I want to see drag race footage.....

You probably will.
It turns out he's literally just down the street from me. Two or three miles..lol!
-Jon


'The little su-BAR-u... Wow.'
-
books1
- 360 Master
- Posts: 4980
- Joined: 10 years ago
- Location: Perth, Western Australia ..... Young SS downunder
#25
Post
by books1 » 8 years ago
patrickturner wrote:subaru360nut wrote:Patrick - welcome to The Club! It is not often I see a Young with the correct wheel covers, but your has them. If you want the hood ornament contact Burt Richmond in IL, he got some remade.
I used to have a lot of Young bumper ends, last one left about 10 years ago. Last new Young bumpers went to a member in OK about 20 years ago. But there are bound to be some around.
I went to see a member in Wynne AR back in 1981, George Benefield who was the first one in the Club with parts books. He has since passed away, but he had about a dozen 360s, all body styles, that he had restored. The Young bumper ends did not look like rubber, so I asked George about them and found he had hand-whittled them from wood and painted them black.
Ed
Thanks for the info, the car is 99% complete besides a few cosmetic parts. I will have to look this person up. I am new to this (obviously) So it will take me a few times around the block to learn about this forum. And to hand make bumper ends out of wood, thats a craft!
I forgot to say - look/ask locally first! - it comes of residing down here, where there are very few Sube 360s and parts are just as expensive to bring in from USA as they are from Japan (nowadays) !!
Cheers,
Ian
-
books1
- 360 Master
- Posts: 4980
- Joined: 10 years ago
- Location: Perth, Western Australia ..... Young SS downunder
#26
Post
by books1 » 8 years ago
subaru360nut wrote:I've had one of those orange Chiltons since I first got my van 37 years ago. Then I gradually acquired all the Subaru manuals and in 1981 got permission from SOA to reprint them, at cost, for Club members only. I still have some reprints left, they are also available online (free) and on CD (at cost).
ed
Could the Chilton stuff possibly be reproduced on these forums, Ed?
Cheers,
Ian
-
subaru360nut
- Club Founder - 360 Guru
- Posts: 3833
- Joined: 15 years ago
- Location: Tucson AZ (I'm Ed Parsil)
#27
Post
by subaru360nut » 8 years ago
Only with written permission from Chilton. They are EXCERPTS and CONDENSED
articles from the Shop Manuals, which are already available online.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
Who is online
Users browsing this forum: No registered users and 3 guests