Hello from Pennsylvania
Moderators: Subie Gal, 2stroketurbo
Hello from Pennsylvania
Hi Everyone. i am a new owner of a 1968 sedan from Dillsburg PA. I got the car for a fun winter project. It has been sitting for years in a airplane hanger. The interior is shot but the body is very solid - a rare find for Pennsylvania! I am in the process of resealing the engine and hopefulling putting new rings in it to freshen it up (if I can find rings). I will try and post some pics. Are there any members in the central PA area?
Thanks,
Rob
Thanks,
Rob
1968 Subaru 36 Sedan
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
Re: Hello from Pennsylvania
Hello
welcome to the club!
post pictures when you can.... we love pix!!!!!
welcome to the club!
post pictures when you can.... we love pix!!!!!
1970 360 Sambar Van aka Stanley
1970 360 Sambar Truck aka Dirty
1970 360 Sedan - yet to be named.
1970 Subaru FF-1
1970 360 Sambar Truck aka Dirty
1970 360 Sedan - yet to be named.
1970 Subaru FF-1
Re: Hello from Pennsylvania
Ooh nice, another '68! What's your VIN?
Rings are available -- one of the few parts that are.
Welcome, it's a great club and the best resource for the car anywhere!
Rings are available -- one of the few parts that are.
Welcome, it's a great club and the best resource for the car anywhere!
-
- Club Founder - 360 Guru
- Posts: 4000
- Joined: 18 years ago
- Location: Tucson AZ (I'm Ed Parsil)
Re: Hello from Pennsylvania
Welcome to The Club!!
If/when you put new rings in be sure to follow the break-in instructions and you will get 100,000 miles at least out of the engine before the next overhaul. See P. 140 & 261 in Vol 2 of Book of Reprints.
Ed
If/when you put new rings in be sure to follow the break-in instructions and you will get 100,000 miles at least out of the engine before the next overhaul. See P. 140 & 261 in Vol 2 of Book of Reprints.
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
-
- 360 Master
- Posts: 5177
- Joined: 18 years ago
- Location: Portland Or. Where we avg 77 days of sunshine per year. Whoopee!
- Contact:
Re: Hello from Pennsylvania
Why is PA a hot spot for 1968's?
Re: Hello from Pennsylvania
Eastern and Central PA is a hot spot in general for 360's
This region is where I have found all of my 360's The one i have right now is from Lancaster and the one I had before this was from York.
Don't forget SOA started out in Bala Cynwyd, PA. ( Suburb of Philly )
This region is where I have found all of my 360's The one i have right now is from Lancaster and the one I had before this was from York.
Don't forget SOA started out in Bala Cynwyd, PA. ( Suburb of Philly )
-Jon
'The little su-BAR-u... Wow.'
'The little su-BAR-u... Wow.'
Re: Hello from Pennsylvania
Thansk everyone. Here are some pictures - the floors and really the whole car is very solid. It was repainted orange many years ago. I am glad rings are available. I have studied the BOR, but where do we go to find out if we can get parts? It sounds like there is somekind of stash for members of the club, who do we contact for those parts? Also, for ones that are still available through Subaru, what is the best way to order them? Thanks so much!
1968 Subaru 36 Sedan
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
Re: Hello from Pennsylvania
Very nice Rob.
It looks like a good solid example.
The 'Secret Stash' is spread all around the club..
Some members have bins full of spare parts that they forget about until they are asked for.
The best thing to do is simply ask and see who responds..
But many members dont even vist the online site or arent as active as some of us.
Those members are best contacted by mail at their addresses easily found in the newsletters.
It looks like a good solid example.
The 'Secret Stash' is spread all around the club..
Some members have bins full of spare parts that they forget about until they are asked for.
The best thing to do is simply ask and see who responds..
But many members dont even vist the online site or arent as active as some of us.
Those members are best contacted by mail at their addresses easily found in the newsletters.
-Jon
'The little su-BAR-u... Wow.'
'The little su-BAR-u... Wow.'
Re: Hello from Pennsylvania
nice and clean! what's your VIN last four? mine is 3268
Re: Hello from Pennsylvania
HI. Thanks for the tips on new parts, I will post my needs in the wanted section. Here is my VIN and engine numbers:
Vin: K14L - 3331
Engine: EK32-638283
Thanks,
Rob
Vin: K14L - 3331
Engine: EK32-638283
Thanks,
Rob
1968 Subaru 36 Sedan
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
-
- Club Founder - 360 Guru
- Posts: 4000
- Joined: 18 years ago
- Location: Tucson AZ (I'm Ed Parsil)
Re: Hello from Pennsylvania
Rob - thanks for the VIN, I'll add it to the master list I have been creating, please e-mail or PM me so I have your last name. I list owners and State after each VIN # that we have.
Ed
Ed
300,000+ miles on Subaru 360s since Feb. 1975, and have never (yet) been stuck on the road with one!
Re: Hello from Pennsylvania
Hi Everyone. I got my 360 running today. Thanks for everyone's help. It still needs some brake adjustment, but overall it drove well. Now the body work starts!
http://www.youtube.com/watch?v=UWMeSkZqNsU
http://www.youtube.com/watch?v=UWMeSkZqNsU
1968 Subaru 36 Sedan
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
1987 Bertone (Fiat) X1/9
1982 Lancia Zagato
- books1
- 360 Master
- Posts: 5561
- Joined: 13 years ago
- Location: Perth, Western Australia ..... Young SS downunder
Re: Hello from Pennsylvania
Sounds like The Wars of the Roses !!!Sigmaz wrote:(...) This region is where I have found all of my 360's The one I have right now is from Lancaster and the one I had before this was from York. (...)
- books1
- 360 Master
- Posts: 5561
- Joined: 13 years ago
- Location: Perth, Western Australia ..... Young SS downunder
Re: Hello from Pennsylvania
(Oh! - and congrats Rob, for getting up and running !)
Cheers,
Ian
Cheers,
Ian