- Search

kjrcace360fan

No matter how wacky a post might be, you're a valued member and I look forward to reading them all.

kjrcace360fan

Other observations. The bottom side doesn't look too bad but in the shot of the battery box you can see that the edge of the opening is also rusted away and painted over. Painting over rust and bad body work leads me to believe that the paint was not part of a restoration but either to prevent any m...

kjrcace360fan

Looking at the pics I'd have to wander how bad the rust is. Mine looks way worse on the surface but It doesn't have that much rust through in the doors. I would figure the bed to be very bad also given the condition of the bottom of the door. Gas tank too. I'd want confirmation that the pics show al...

kjrcace360fan

Welcome to the club. What other vehicles do you have? We'd all like to see them. I couldn't get into the drop box. If you email the pics to ssi_kjones@wvdsl.net I'll post them here.

kjrcace360fan

Disassemble, sleeve wheel cylinders and master, polish the pistons, get new seals and brake lines reassemble, good to go.

kjrcace360fan

Hood prop. This is a pic of the front hood prop. https://c6.staticflickr.com/9/8519/8612416245_7fe84c6790_b.jpg March 16 2013 024 (1024x768) by Kevin Jones , on Flickr There is one for sale on ebay now. It includes the hood latch but I'm not sure it is the front hood latch. If it is it's missing the...

kjrcace360fan

Say it aint so. Didn't Oldone send you some rockers? There's a company here in the states that makes Dune buggies but more importantly makes complete frames/ pans for VW bugs. I think they make floor pans. I know someone makes VW floor pans. From what you posted previously I didn't think your body w...

kjrcace360fan

Welcome to the club. We're here to help. Lets see that 360.

kjrcace360fan

kjrcace360fan

Preciador6 wrote:Make the Subaru into a rat rod would be cool.

If this is your plan I have several bodies I rather see chopped up than one that has minimal rust. Just let me know.

kjrcace360fan

Does that yellow tube frame have 360 components on it? Motor and trans? Could it be a Subaru Burrito?

kjrcace360fan

Wish your shack was closer to my shack. If it was I'd be way too much

kjrcace360fan

Updating would be cool. I love being a part of a group who are so willing to take it upon themselves to create things like this.

kjrcace360fan

Looks like you have most of the important stuff. Now lets get to it. thanks for the pics

kjrcace360fan

Welcome, Can't wait to see some pics. Just ask you'll find we're a pretty good source for help.

kjrcace360fan

Could and if biggest words in the dictionary

kjrcace360fan

Probably has brakes they just don't work.

kjrcace360fan

Welcome. Can't wait to see the pics. Pull your oil pump. Should be the first engine project.

kjrcace360fan

Welcome, let us know if we can help

kjrcace360fan

Welcome, that looks like two very well preserved 360s. Can't wait to see more pics.

kjrcace360fan

Welcome, We'll help all we can and you know we need pics

kjrcace360fan

Love the SVX too.

kjrcace360fan

Looks pretty good! Let us know where you need help.

kjrcace360fan

Welcome aboard! After a while you'll notice we're all a little Subie nuts. Nice pics and looks like a real gem to start with.

kjrcace360fan

I'm doing fine. No worries.

kjrcace360fan

Is that one of my windshield gaskets that hold the trim?

kjrcace360fan

And Welcome Back

kjrcace360fan

I have a 360 with title that runs and needs brake and body work If your interested. Hippie is the 360 I'm talking about.

kjrcace360fan

Welcome! That young looks exactly like Spud. He's a young too and looks to be orange like yours. Is yours the original paint? It look to be in great shape and has most of it's parts.

kjrcace360fan

Welcome Max. I also have a Young, It's orange or faded red. I call him "Spud" cause I found him in Idaho. Anyway If I can help let me know. Also I rebuilt a 68 Vw Beetle for my first car. I paid the guy 250 and towed it out of his barnyard when I was 14. I had it ready to drive when I was 16. So you...

kjrcace360fan

Sounds pretty healthy. Nice work. Not a big fan of the light panel but hey, some parts become too hard to find and you wanna run these things.

kjrcace360fan

I wish my shop looked like that. Mine is currently a mess after recently moving and building a new garage. I'm sure I'll get it better sorted but currently I'm moving stuff to finish the last little bits of the garage and installing equipment. My experience with 360's is not long but the main thrust...

kjrcace360fan

Welcome to the club. We all like to see your 360 pics.

kjrcace360fan

Welcome to the club

kjrcace360fan

Welcome to the club. We're enjoying 70 Degree days here in WV. Great month to be moving a garage or two.

kjrcace360fan

Welcome to the club. If you want a 360 with a great club history I have one for sale. It's in WV though. My Hippie is for sale. Sadly I need to let one go. It's 90+ % Complete runs but needs brake work. Click the search button and type hippie in you'll find nearly all the information available on th...

kjrcace360fan

Welcome Back. 360's are sometimes good therapy

kjrcace360fan

Welcome to the club. Nice find. Yes drop that oil pump asap. You can run on mixed gas and oil till you get the Oil pump working. That Motor Sound pretty solid.

kjrcace360fan

Are you in need of the front engine mount metal? I don't have any and my truck still has the engine mounted. I'm sure you can find a member with at least pics of the engine mount metal. Other wise I'll be done with my moving and construction in a couple months I could maybe get you a pattern and pic...

kjrcace360fan

My 360 Young "Spud" has one key that fits ignition, door and gas door. Same with Hippie. So I figure originally you received one key for two drivers. Or maybe you only got one key.

kjrcace360fan

Welcome to the club and the geographic neighborhood. I'm in WV at least. Can't wait to see the pics. Wheel cylinders are available but will most likely need sleeved. You might have to look a while. though if you have none. I bought a few 360's just for parts and a parts lot for a couple parts. My wi...

kjrcace360fan

Welcome to the club. Nice looking van. Power train really isn't that bigga deal. Looks like you have a lot of the hard to find stuff. Like a nice body. Those are some pretty cool previous projects. I too have done a vw bug though and a datsun two pickup restores 72 and 75. 30 years ago.

kjrcace360fan

Welcome to the club.

kjrcace360fan

Garm wrote:I'm working on the door strap brackets, by the way.

Go Garm!

kjrcace360fan

Welcome to the club. Nice 360

kjrcace360fan

The van was in White Oak Tx. I drove 28 hours straight to get it home!!! I have tried to add pics but it tells me file is to large-- still trying to figure it out!!! I have been thru White Oak Many,Many Many Times & it doesn't take that long?? Where was it hiding, north or south of the highway 80??...

kjrcace360fan

Welcome, I have a truck from texas, waiting in the lineup.

kjrcace360fan

Welcome, Please post pics. We love them.

kjrcace360fan

Anyone know the measurements on the folding frame?

kjrcace360fan

Welcome, Fellow engineer here. I think after you get used to these cars you will appreciate the engineering that went into them. When you consider they took basically a snowmobile engine and used it to produce a cheap, small, light people mover that satisfied the market for which it was designed for...

Search found 233 matches