*** As part of the forum post crash revival, The phpBB software has also been upgraded from 3.2.1 to 3.2.7 ***
Please report any issues that you may experience and thanks again for your patience and understanding during the outage.

(You may clear this alert message by clicking the X in the top right corner of this box)
-Sigmaz (jon)

Search found 241 matches

by kjrcace360fan
8 years ago
Forum: Introduce Yourself!
Topic: Wannabe 360 owner
Replies: 28
Views: 13102

Re: Wannabe 360 owner

What would your budget be for a 360 shell, no motor / trans and in need of glass. I know of one a guy had about a year ago. Not sure on the rust issues. The building it was in burned down but it only suffered some damage from heat, paint blistered in a couple areas. I was looking for engine parts at...
by kjrcace360fan
8 years ago
Forum: Introduce Yourself!
Topic: Wannabe 360 owner
Replies: 28
Views: 13102

Re: Wannabe 360 owner

Welcome, I think the two will go well together since the 360 is powered by a snowmobile engine originally. I have often thought the comet clutch would greatly reduce the drag on the motor compared to the transmission, I always get stuck on how to back it up with no reverse.
by kjrcace360fan
8 years ago
Forum: Introduce Yourself!
Topic: New member from Carlsbad,NM.
Replies: 19
Views: 8814

Re: New member from Carlsbad,NM.

Welcome, I also have a young I call Spud cause I got him from Idaho. Love the truck. Spud is in similar condition as the truck. I think his interior is worse but the body is similar. He also runs and brakes well. If I can be of any assistance let me know. Also I wouldn't just trash the motor. you ne...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New Member in L.A. refurbishing a '67 Deluxe
Replies: 8
Views: 5316

Re: New Member in L.A. refurbishing a '67 Deluxe

:shock: Another cat lover I see, welcome welcome welcome.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New Member in L.A. refurbishing a '67 Deluxe
Replies: 8
Views: 5316

Re: New Member in L.A. refurbishing a '67 Deluxe

That's the one with the melted headlight surrounds. At first I thought you had some radical interior, then I noticed it was just a cat. Really doesn't seem too bad. It has the orange tint to it too, on the outside. I'm trying to figure out if my young was painte the current color in the factory or n...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: new member from south of ft worth... (cleburne)
Replies: 17
Views: 8827

Re: new member from south of ft worth... (cleburne)

2stroketurbo wrote:whoops. got the wipers cornfuddled
Happens to me all the time also. I have to look at my pics to be sure. It does appear to have young doors judging from the black spot where the lock sticker should be.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: new member from south of ft worth... (cleburne)
Replies: 17
Views: 8827

Re: new member from south of ft worth... (cleburne)

Welcome, You have a wanabe young, A standard 360 someone switched the instrument cluster, steering wheel and not sure about the doors. The wipers park the other way on a real young. You are very lucky. You have the highly prized cluster and steering wheel. You also have a standard sedan roof. See be...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New member from the chilly Northwest
Replies: 14
Views: 7012

Re: New member from the chilly Northwest

I must have slipped and fell off the welcome wagon. Sorry so late but a big ole WELCOME to the club. If you think I can help, you must reeaaallllllly need help, but I'll still try anyway.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Another new guy. Bryan in Boise, Idaho. Truck in a box :).
Replies: 17
Views: 8632

Re: Another new guy. Bryan in Boise, Idaho. Truck in a box :

Welcome to the madness! I only have sedans but if you think I can help just let me know.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Mele Kalikimaka from Portland, OR
Replies: 20
Views: 9753

Re: Mele Kalikimaka from Portland, OR

Dude, You got it just as bad as the rest of us. You should fit right in. :mrgreen:
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: hello from sturgis south dakota
Replies: 12
Views: 6399

Re: hello from sturgis south dakota

Welcome to the club, I have a young that looks to be nearly the same color, Is yours original paint? I've been debating on color for mine, It appears to me to be originally orange, looking for a match to confirm.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: From Indianapolis,In. Hello everybody
Replies: 16
Views: 8994

Re: From Indianapolis,In. Hello everybody

Welcome, an impulse 360 buy, That's certainly not unheard of but many of us have not been so fortunate. "Decent interior and it runs with a clunk" To a lot of us your way ahead already. With the club, your elbo grease and some good advice you'll be loving it soon.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Hello from Spokane WA!
Replies: 15
Views: 8449

Re: Hello from Spokane WA!

Welcome!! Always great to see another 360 coming back to life. Here to help if I can.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Another Minnesota New Member
Replies: 14
Views: 7819

Re: Another Minnesota New Member

Welcome to the club, Wisdom is not measured by the initial purchase, it is measured in how many rare parts you destroy before you realize they are rare. Looks like it was well bought to me. But hey I'm a frequent shipper. Somewhere there are truckers telling stories about 360's I know they are.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Hello, I am a new member
Replies: 27
Views: 14110

Re: Hello, I am a new member

I assume you painted the frame also. It looks good too.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Hello, I am a new member
Replies: 27
Views: 14110

Re: Hello, I am a new member

That's looking really sweet! I had no Idea the bed actually unbolted from the cab. That is just so cool. You could make a flatbed with an engine hump. I'm sure that would get even more comments. I hope I can get spud's paint that good. His body deserves a good paint job. Way to go. Great color, what...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: NEW GUY
Replies: 15
Views: 8421

Re: NEW GUY

Welcome, I only have sedans but if I can be of assistance let me know. I am closing in on the end of putting my new garage together so I am going to have time to sort through some parts I have acquired. I figure there are some parts that might interchange, I could be wrong.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Hello, I am a new member
Replies: 27
Views: 14110

Re: Hello, I am a new member

Welcome to the club. Hopefully we will be able to help. We love to see um spurting smoke and rolling down the road. It tends to bring smiles to the faces of on lookers. Drivers too.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New Member Minnesota
Replies: 25
Views: 11932

Re: New Member Minnesota

Welcome, Looks like the vans are in fairly good condition. It's really cool how their coming back to the family they started with. Love the pics keep em coming.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New Member
Replies: 23
Views: 11992

Re: New Member

The autobahn? Always dreamed of driving without restriction. One of the motivations of owning a 360. Can't wait do drive it all out!!! I've had an 06 STI since it was new and for 75000 miles I've been holding my foot up for most of the time. It's cool just to drop the hammer an not worry about Barne...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New Member
Replies: 23
Views: 11992

Re: New Member

Welcome, I just found a very good Young in Idaho and It took about a year to get the deal made and shipped to me in WV. That was just across the US. It is nice to have one in good shape. I now have three others on the fourth is on its way come monday. One parts car suffers from rust issues. One has ...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: How to locate Vin Number on 360 sedan
Replies: 22
Views: 11824

Re: How to locate Vin Number on 360 sedan

It is made of unobtanium and very hard to find. The windshield rubber is not available in the original form, aftermarket is available, check in the posts, someone in the club has it... Good luck with the car "unobtanium" They sure used a lot of that stuff as near as I can tell. Possibly main ingred...
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New member from Orlando, Fl
Replies: 13
Views: 7299

Re: New member from Orlando, Fl

Hi and welcome. We love pics and are here to help. Good luck.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: Hello From Novato California
Replies: 21
Views: 11621

Re: Hello From Novato California

Could you post a link to the tires?
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: new member
Replies: 3
Views: 3033

Re: new member

Welcome, Good to have ya. You'll have to wait for some of the van/truck guys to chime in but I think those are hard to find. But that is what they said about pistons, Now their available. If I can help just let me know.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: new member from pa
Replies: 13
Views: 7509

Re: new member from pa

Welcome to the club, My two 360's came from southwestern pa. I am originally from Moundsville, WV. Good to have ya. Can't wait to see the pics.
by kjrcace360fan
9 years ago
Forum: Introduce Yourself!
Topic: New members from Buckley, WA
Replies: 6
Views: 4295

Re: New members from Buckley, WA

Welcome, I am far away but if you ask I'll do what I can to help. It's great to see new members popping up. Let's see some pics.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: New members in Port Orchard Washington
Replies: 5
Views: 4630

Re: New members in Port Orchard Washington

Welcome, great to have another proud 360 owner.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: New member from Santa Clarita, CA.
Replies: 2
Views: 2697

Re: New member from Santa Clarita, CA.

Welcome, I seen the pics of your van, Cool. I am more of a purist but sometimes refer to my 360's as clown cars. Mostly because they bring smiles to peoples faces when they see them. Any how great to know another 360 has a good home.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: New 360 owner in AZ
Replies: 24
Views: 12809

Re: New 360 owner in AZ

will do. unperforated floor boards are just what the hippie 360 needs. If you need part of them I would still be interested in the remains. I will pm this weekend or monday at the latest.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: New 360 owner in AZ
Replies: 24
Views: 12809

Re: New 360 owner in AZ

Just curious if you have any use for the floor boards of the car that has the body cut off? I could use those if they are in good shape. Please let me know.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: New 360 owner in AZ
Replies: 24
Views: 12809

Re: New 360 owner in AZ

Welcome to the club! Glad to have another or two 360's on the mend. Haven't been here long but was lucky enough to find a 360 that only needed brake work and a mild tune up to get going. I have been lucky enough to drive it around my parents yard. Of the six wheel cylinders 4 are leaking and the rub...
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: Hello from San Diego
Replies: 13
Views: 8484

Re: Hello from San Diego

I was very lucky, the guy I bought mine from knew a guy with a truck and trailer. He hauled mine to my parents. Dad had the storage available. I looked at these pretty hard but shipping nearly coast to coast is cost prohibitive. Seems like you got a good deal. Welcome to the club, do they need pisto...
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: WV 360
Replies: 11
Views: 7620

Re: WV 360

Welcome! I can't believe two 360 fans in Elkview, Wv We gotta get together.
I live near Smith's plaza and the Elkveiw post office. Where are you located?
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: new club member blair
Replies: 15
Views: 10795

Re: new club member blair

From the sound of it some of the dog did :shock:
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: new club member blair
Replies: 15
Views: 10795

Re: new club member blair

Welcome Blair, If your sure your ready, I am ate up with the fever and my cars aren't even at my house yet. The draw of the 360 is all powerful. Seriously If you are deluded enough to think I can help just pm me. I have been away from the restoring car hobby for a while but I have fixed many vehicle...
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: New to 360s
Replies: 10
Views: 6615

Re: New to 360s

Welcome, I hope we can help make your experience with your 360 a great one.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: Greetings from Kansas
Replies: 21
Views: 13289

Re: Greetings from Kansas

would you happen to know what the serial numbers are for the red white and blue cars? I am curious because neither of my cars have the emblem below the window and I noticed the red one and white one have different emblems. One of mine is a 69 and one is a 1970.
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: Greetings from Kansas
Replies: 21
Views: 13289

Re: Greetings from Kansas

Is the rust only on the drivers side? If so I would think it was more a case of the roof or windshield leaking. Paint looks original and your out shell looks immaculate to me. Welding under the car beats welding of the outer body anyday. I would love to find a young in that shape. The wife would hat...
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: Greetings from Kansas
Replies: 21
Views: 13289

Re: Greetings from Kansas

Metal can be replaced. My first restore was a 68 beetle. We called it "Fred's Ride" cause it was like the Flintstones car. You could push it without getting out. And when you opened both doors You had to lift them back up because the metal that joined the two door posts under the door was missing. I...
by kjrcace360fan
10 years ago
Forum: Introduce Yourself!
Topic: long time subie fan
Replies: 1
Views: 3116

long time subie fan

Been around subies since 1980 my parents first GL I believe, Then new ones every 2 years for my Mom, who was a traveling county health nurse. My wife and I had a 93 legacy for 16 years and replaced it with a 2009 and I finally let my 92 Cavalier go in 06 to get my rally fixing STI. 55K later still c...