- Search

oldone

The F 150s run down the road at 80MPH at 1600 rpms??? Being old school I prefer vehicles without computers. I also like the fuel mileage & power for the ones with them. My Smart Car is a hoot to drive, and is driven more than any other in the fleet. Five speed with dry clutch, no torque converter & ...

oldone

You put bigger tires & wheels on it??? If so the speed sensors, speedometer, throttle sensor & the engine rpm doesn't make sense to the computer??????

oldone

What brand of truck, the Fords go in & out of lockup. & the ten speeds hunt gears in the hills& high winds.

oldone

Jon The day's of Dealerships having Mechanics is gone . We now have Tech's that plug the scanner in & it tells them what's wrong, then tells them where the part is to be replaced. They don't rebuild motors or trannys anymore , they install a new or factory rebuilt. That said there are some old timer...

oldone

Jon The Lab Rat..... Thank you for keeping this going, Jamie knows how to get you going on our problems. Wish you would get another 360! Miss you on the forum. Thanks again. Oldone

oldone

Welcome aboard.... Nice van..... What island??? I have been to Maui & Oahu.....

oldone

Welcome aboard, lot's of info & the BOR "book of repairs" that ED started. Please send him your Vin # as he has recorded many over the years & may help you know so history.
Looks like a pretty solid start. Was the last owner running the tire tubeless???

oldone

Brian did you get the Newbies access yet?? Thanks for the reply. I try to get the Newbies on face book to join the club & this forum for information.

oldone

Thanks We may be floating around without person in charge. We need to find out if they are interested in the club anymore? This club should not be left to die.

oldone

Carl could the fires out your way be affecting Brian or Jamie?????

oldone

Jamie, Brian, Jon any help here or are you all writing the forum off??? Reply!!

oldone

Jamie are you ever on here??? or Brian??? You are going to let this die.....If you are not interested any more pass the torch to some one else. Sign these people up!!!

oldone

I would 2nd that, as I try to get the newbie on face book to join us here. This was a great forum, but everyone is going to instant reply face book. Some of the other forums I was on are now gone from the internet along with all the info.

oldone

Sometimes Brian has been busy making a living, but I hope he gets the new members on the forum soon. I have campaigned hard on the face book 360 page to get them here. This is the place to be for serious or newbies 360ers to be. We need the forum to secede, not like some of the other Micro car ones ...

oldone

Hello It looks like someone was going to install an electric fuel pump... The factory vacuum fuel pump was good, except the check valve springs failed, I have had them reopped in stainless No wiring switches or relays. On the throttle linkage, someone used it for a tow hook.

oldone

Front Subaru or Sambar badge is repoped by Bobby De Cola.

oldone

Welcome from Norman Okla.

I'll be the first to say "We like Pics"!!! so load us some up.

Mark Hattan in Portland may be of some help.???

oldone

Welcome aboard from Norman Okla. Nice group you have there. Hope to see a lot more of them. Oldone

oldone

Happy to hear from you & glad the sedan is home.

oldone

Welcome from Norman Okla. I have wheel cyl cups on ebay & I use Apple Hydraulics to sleeve the cyls . The 360 needs some oil with the ether , I would drop & check the oil pump out for good measure.

oldone

Welcome to the Club !!! I have the wheel cylinder cups, but most of the time the cyls will need to be sleeved.

oldone

I have the new wheel cylinder cups. $30.00 shipped to you. Sedan or T/V sets Also they are on ebay.

oldone

Subaru 360's have some common brake problems, the master & wheel cylinders are aluminium & pit due to corrosion from water in them. The other problem is the brake linings that are bonded to aluminium shoes become unbonded due to corrosion also. The most common fix is to resleeve the M/C & wheel cyli...

oldone

I would think Dot 3? if it has sat that long' Does it have a solid /firm brake pedal ? I sell the wheel cylinder cups on Ebay. Chances are someone has sleeved them if it still has fluid & a pedal. CK to see if the points aren't dirty or corroded & gaped correctly, check timing. Also ck to if plug wi...

oldone

Welcome aboard. You can get a lot help from the members here. Great start on the 360!

oldone

Welcome to the club. That's a really nice Sambar. Great history. The most common problem with the Org Fuel pump was the check valve springs broke & it fail to pump fuel afterwards. The pump is easy to remove & dissemble, I have had new stainless steel springs made. Most Elec pumps put out too much p...

oldone

Welcome to the club from Norman Okla. Plenty of help here. We like pic's

oldone

ED Looks like it didn't work

oldone

Don't worry ED, I can't remember me..........

And sometimes that's good.......

oldone

I PM'd you.

oldone

Dan Welcome aboard ........
I may have a recoverable one......But the shipping from Oklahoma would be expensive. Maybe some one closer has one??

oldone

David Welcome to the Club from Norman Okla....You should find a lot of help here on your project.......

oldone

Welcome to the club......Put your location in the left with your sig. What are you looking for Sedan/Van /Truck????

oldone

Ed if the cookies are from Ian, I hope they are TIM TAM's

oldone

S l o w l y. . . . ..Office / library & bath framed. New heater mounted with plenum. A/c ducts from outside are in. Need to frame 3 more 20' walls & mount the 20' open face trusses. Wiring & dry wall, going to order my Speedway floor tiles this week for the 20'x20' clean room. I have the porcelain t...

oldone

Hamid ,"Oldyellers" keeper has not been able to log in for some time. Can we get some help for him??????

oldone

Great job to Ed & the starters/workers; Brian, Jamie, & the guy with the Lab Rat....like the award shows I'm leaving out some people who contributed also... I wish more people/club members would use the Forum & not Face book & U tube. Not much discussions there. :( This group "here" has put a good #...

oldone

NO!!!!

oldone

Welcome aboard. Ed is correct, my sedan wasn't sold new until 1972.... but is titled as a 70. I have an add from the Lubbock TX newspaper advertising it for $595.00 new left over. I also have the Org title dated a few days later with a lien on it. A member in Lubbock has the other one. The "NEW" FF1...

oldone

Welcome aboard. You made a good choice in joining this group of diehard 360 Subie keepers and fans. I'm also retired & am in the slow process of restoring a sedan & have a pretty much original truck.

oldone

Welcome to the club....I'm not a custom guy .... save the parts for the people who are trying to put some back on the road.. Carry on with your dream.....

oldone

New member in September Jeff Fuller Dean can't log in & can't get any response, Can someone help him??????

oldone

Welcome to the club.

oldone

We all sometimes have fat fingers........LOL.....Did you ever find the glass , stop the rain???

oldone

Rob The 68's I think were the last year for plexiglass rear windows. Is it a 3 speed or 4 speed? If it's a 4 speed some one may have made a rear window from plastic, being unable to find a glass one. I have a extra glass one.

oldone

Welcome to the club....... Maybe some one will have a air cleaner can , it takes time to find the hard to get parts.

oldone

I was recently in a restaurant here in Norman, 6 girls were texting each other a the same table???? Talk to each other.........I think the club here will die without new members & the instant phone/texts. Sad for an old guy that loves Micro's & the newby's that don't have a clue.......

oldone

We need to get the newby's to join the club, to keep this going. The years of knowledge & experience on this site is second to none. This is the best club I belong to , next to the German Veloerx club Everybody here is so dependent-on the DAMN phone.........I DON"T TEXT ON THE PHONE< TALK TO ME OR I...

oldone

I'll double down on that!!!

oldone

People on facebook with 360s want to join the club but can get the site to cooperate???!!! I could not get the pdf page to come up, we need new members to keep this club going!!!! Jon? Jamie?? Brain??

Search found 388 matches