- Search

kjrcace360fan

Welcome, Looks like a nice start

kjrcace360fan

Welcome to the club. Nice start. Just post any questions and the few die hards here will help you out. Also at the top right of this screen is the search field. It will be your best friend besides the 360s

kjrcace360fan

kjrcace360fan

We need to get as many people as possible on here.

kjrcace360fan

Looks like a really nice van.

kjrcace360fan

Welcome to the group. If your near Mark H. Your in good shape. The rest of us will do what ever we can to see another 360 on the road. I mostly have sedan parts but I'm willing to help. I also have Wiseco Pistons if needed.

kjrcace360fan

Welcome, I see your in deep. Love the pics. Too bad you found that burrito before me. I'm still bummed

kjrcace360fan

Good to see ya here. Welcome to the 360 think tank.

kjrcace360fan

Pertroics ? of something like that. Mark was envolved in getting them made but I don't know where to get them. I'll look to see if I can get the info.

kjrcace360fan

Get the book of reprints B O R #1 Remove the oil pump. #2 Either make sure the oil pump is functioning properly or use mixed gas to get it going from an exterior gas tank. I use a Briggs aux poly tank. I also would suggest 16 to 1 gas to oil ratio for the first start ups #3 oil the rings through the...

kjrcace360fan

I have the windshield gasket that holds the chrome strip. It is not a connected loop, just a length of rubber seal which is the correct profile matched to the original. It's $80.00 plus shipping. $12.00 +- Looks like a great 360 to start with. Nice paint too. I'm also accepting pre orders for piston...

kjrcace360fan

^ What he said.

kjrcace360fan

Welcome to the club. Nice van

kjrcace360fan

If the motor turns free I'd get a look down in the cylinders. and take off the intake and exhaust to see if there are any contaminants in there. Animal nests and such. If all is clear I'd pull the oil pump and make sure it's getting the propper flow rate and operates freely. If oil pump is good, put...

kjrcace360fan

Welcome to the club. Show us that 360

kjrcace360fan

Welcome, I also have some seats but need covering so basically frames and springs. If you can't find any closer let me know. I'm in WV

kjrcace360fan

DB1 is my 360 Yacht car or Jolly. Basically a 360 with the roof cut off and doors discarded. A fiberglass cover for all the exposed cut metal. Mine had the fiberglass closure fared into the body work. DB2 is my 360 Cheesburger dune buggy project. It was a prototype joint venture between penny's dept...

kjrcace360fan

I have a Young, Deluxe Sedan, DB1 and DB2, Several parts cars. What's your pleasure?

kjrcace360fan

Right down the road. Cool.

kjrcace360fan

Welcome to the club. What part of the south are you talking about? I'm in WV and have some for sale.

kjrcace360fan

Late to the welcome party but Howdy from WV USA. Your in the right place. We love to help and post pics

kjrcace360fan

I agree. Love FB when I want to waste time. Love this forum when I need help with my 360s. Or other Subes for that matter. I've been real busy transferring parts from my beloved 2001 RS which had 40k miles on it when my daughter's best friend rearended her totalling the RS my daughter named precious...

kjrcace360fan

Welcome to the club! Nice find.

kjrcace360fan

Welcome to the club. Some pics would be nice. I have several parts available. Replacement pistons are still available. I'm pretty sure stock size is 61.5 mm Below is a link to my source since memory isn't what it once was. http://www.subaru360club.org/forums/viewtopic.php?f=16&t=2049&hilit=pistons&s...

kjrcace360fan

Welcome to the club. I'm more of a restore guy, but I'm a car enthusiast. If it has wheels and a motor I'm in. I'm still kicking around an idea of boxer 4 mid engine 360 sedan. I've been kicking it around so long my feet hurt. lol I just need a few months of time and an acre under roof. I'd get some...

kjrcace360fan

Welcome to the club, Not much help with truck parts

kjrcace360fan

I'll still be available via email and land line if need be. but more knowledge flows from your phone than mine. But yeah, I've driven for several long 4-H Trips and usually the 4-h Kids are pretty good about verbal communication at our destination but in the vans or when we've hired buses they sit a...

kjrcace360fan

Nice work! Excellent interior too.

kjrcace360fan

Brian,
Not really content correct but I just wanted to take this opportunity to thank you for writing and sending out the newsletter. It takes people like you, Jamie, Ed, Jon, Mark, Garm and all the others that keep this group going. Thanks

kjrcace360fan

Welcome, Glad to have ya

kjrcace360fan

I was able to see the membership application in my browser, Would it be a problem to post a copy on facebook?

kjrcace360fan

Woodstock, Just curious what your vin # is

kjrcace360fan

Welcome to the club

kjrcace360fan

Welcome, your in the right place to get that truck back on the road.

kjrcace360fan

Welcome to the club. Looks like a good project car. This club will help you get it on the road. Father son project, Can't get any better than that.

kjrcace360fan

According to Bobby Decola, he has two Cheesburgers. And one Jolly. I'm hoping to make a trip down to his place soon to see how the pedals and the steering is mounted on the cheesbugers. Does anyone know if you could rotate the rack on the truck/van chassis and use the truck van column? I'm guessing ...

kjrcace360fan

Its Sitting in my garage

kjrcace360fan

I have a couple pics of these with the top but nothing real usable to copy. https://farm5.staticflickr.com/4673/39957481192_e6106401dd_z.jpg FL0114-175370_10 by Kevin Jones , on Flickr https://farm5.staticflickr.com/4656/28209739849_a1d973ec10_z.jpg FL0114-175370_4 by Kevin Jones , on Flickr

kjrcace360fan

Welcome to the club, Excellent find. I know because I evidently have woodstocks sibling. I'm calling mine DB-1. Do you have the roof and supports for woodstock? What part of PA? I'm in Charleston WV https://farm9.staticflickr.com/8240/8612416503_25332ae7d4_b.jpg DSC02007 (1024x768) by Kevin Jones , ...

kjrcace360fan

Hoping to hear from you for many more years. Your such a great help to everyone here.

kjrcace360fan

Welcome to the club. I'm having a hard time figuring out what is rough about either 360. My rough ones you can see through in several places. They both look pretty nice.

kjrcace360fan

Welcome to the club. If you look up the roster, you can find all where all the members are. You can also look up members on this forum and if they put their location in their profile on the left you'll know where they are located.

kjrcace360fan

I just want to take this opportunity to thank those members in charge of keeping this forum up and running. I'd also like to thank the members who keep the club going. There are a whole bunch of members who have benefited from your hard work. When I was working on getting pistons made I was on my ow...

kjrcace360fan

Welcome to the club. Nice van. This is no doubt the braintrust of 360 knowledge. I use the term loosely. lol

kjrcace360fan

I miss the people who have mostly went to facebook. Mainlybecause fb after a while freezes on all my machines. Work, home laptop all freeze on fb. This forum is a much faster less aggravating and much preferred.

kjrcace360fan

Welcome, can't wait to see your pics. Your definitely found the right place to get all the best info on these little gems.

kjrcace360fan

You came to the right place. This is the Only place you need to go for knowledge and help. Can't wait to see some pics. I post mine on flickr.com then copy the bbcode what ever that is directly into the post. I think that's what I do. but it works. sometimes.

kjrcace360fan

Welcome to the club. We're here to help.

kjrcace360fan

Welcome to the club. Lets see some more of those beautiful trucks.

kjrcace360fan

Hope I didn't lead you down the rabbit hole. Looks like a good start. As always I'll help all I can. Can't believe you passed up Hippie for this one but your loss and well Hippie needs more body work. I printed your list and I'll see if I can find you any needed parts.

Search found 241 matches